I-Learnings: 2012

Tuesday, December 11, 2012

MySQL: Localhost vs 127.0.0.1

Yesterday i was trying to connect to MySQL localhost with another port aside from 3306:

mysql -uroot -p -h localhost --port=3390

to my suprise i was login to the default port. My collegue told me that i need to used 127.0.0.1 instead of localhost so i tried it then i search everywhere to find the answer on why oh why its like this until i found a blog that explained the difference between localhost and 127.0.0.1.

source: http://blogs.sakienvirotech.com/index.php/random/2011/08/30/mysql-101-connecting-to-a

With network connections, there are two special addresses that always refer to the machine you are currently using. This is either called 'localhost' or has the IP address of 127.0.0.1. In general using these is equivalent and interchangeable, and uses a special path through the networking subsystem called the local loopback interface. However MySQL has reserved 'localhost' for the special purpose of indicating the use of a UNIX socket and not use networking. This can cause some confusion to new users, but if you understand what is going on it is pretty clear.

'localhost' in MySQL uses the UNIX socket and ignores any port you may supply.

127.0.0.1 in MySQL uses networking and requires a port, using the default if you don't supply it.

Tuesday, November 20, 2012

ERROR 1018 (HY000): Can't read dir of '.' (errno: 24)

We encountered an error in MySQl below:

ERROR 1018 (HY000): Can't read dir of '.' (errno: 24)

Upon searching for some solutions at google we found out that the error means 'Too many open files'. Everything you do in linux is a file (or rather a file descriptor). Every mysql connection, every apache connection etc.

To see how many files a user has open try this

sudo lsof -u mysql

edit the file in /etc/security/limits.conf and add these two mysql lines in at the bottom



#@student        -       maxlogins       4
mysql   soft    nofile  4096
mysql   hard    nofile  8192
# End of file









There is some debate as to whether you need to reboot for this to 
take effect (i say debate, i rebooted, and didnt google for it as i was 
in a rush ymmv).


Once this is set you need to make some changes in the mysql file as 
well.  Assuming yours lives in /etc/mysql/my.cnf - edit or add these 
values





open-files-limit = 2048
table_cache            = 512



The table_cache should be researched (start here: http://dev.mysql.com/doc/refman/5.0/en/table-cache.html) and changes monitored.  The default value is 64, so 512 should be a safe bet to begin with.

Thursday, August 2, 2012

MySQL anonymous user login

After a fresh install of mysql at our linux box server. I was able to login to mysql with any user which we didn't defined.
[root@spica ~]# mysql -utest

Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 12
Server version: 5.1.61 Source distribution

Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> quit
Bye

To fix you need to delete the blank user at the mysql.user tables.

[root@spica ~]# mysql -uroot -p

Enter password:

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 14

Server version: 5.1.61 Source distribution

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;

+--------------------+

| Database |

+--------------------+

| information_schema |

| mysql |

| test |

+--------------------+

3 rows in set (0.00 sec)

mysql> select user,host from mysql.user;

+------+------------+

| user | host |

+------+------------+

| root | 127.0.0.1 |

| | localhost |

| root | localhost |

| | meitnerium |

| root | meitnerium |

+------+------------+

5 rows in set (0.00 sec)

mysql> delete from mysql.user where user='';

Query OK, 2 rows affected (0.00 sec)

mysql> select user,host from mysql.user;

+------+------------+

| user | host |

+------+------------+

| root | 127.0.0.1 |

| root | localhost |

| root | meitnerium |

+------+------------+

3 rows in set (0.00 sec)

mysql> flush privileges;

Query OK, 0 rows affected (0.00 sec)

mysql> quit

Bye

[root@spica ~]# mysql -utest

ERROR 1045 (28000): Access denied for user 'test'@'localhost' (using password: NO)

[root@spica ~]#

Wednesday, August 1, 2012

crontab: command not found

Upon issuing crontab command got an error below

[root@shizune installer]# crontab -e
-bash: crontab: command not found

To Fix install crontabs package.

[root@shizune installer]# yum --enablerepo=remi install crontabs
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: ossm.utm.my
* extras: ossm.utm.my
* remi: remi-mirror.dedipower.com
* updates: centosk3.centos.org
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package crontabs.noarch 0:1.10-33.el6 will be installed
--> Processing Dependency: /etc/cron.d for package: crontabs-1.10-33.el6.noarch
--> Running transaction check
---> Package cronie.x86_64 0:1.4.4-7.el6 will be installed
--> Processing Dependency: dailyjobs for package: cronie-1.4.4-7.el6.x86_64
--> Running transaction check
---> Package cronie-anacron.x86_64 0:1.4.4-7.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

==================================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================================
Installing:
crontabs noarch 1.10-33.el6 base 10 k
Installing for dependencies:
cronie x86_64 1.4.4-7.el6 base 70 k
cronie-anacron x86_64 1.4.4-7.el6 base 29 k

Transaction Summary
==================================================================================================================================================================
Install 3 Package(s)

Total download size: 110 k
Installed size: 211 k
Is this ok [y/N]: y
Downloading Packages:
(1/3): cronie-1.4.4-7.el6.x86_64.rpm | 70 kB 00:00
(2/3): cronie-anacron-1.4.4-7.el6.x86_64.rpm | 29 kB 00:00
(3/3): crontabs-1.10-33.el6.noarch.rpm | 10 kB 00:00
------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 102 kB/s | 110 kB 00:01
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : cronie-1.4.4-7.el6.x86_64 1/3
Installing : crontabs-1.10-33.el6.noarch 2/3
Installing : cronie-anacron-1.4.4-7.el6.x86_64 3/3
Verifying : crontabs-1.10-33.el6.noarch 1/3
Verifying : cronie-1.4.4-7.el6.x86_64 2/3
Verifying : cronie-anacron-1.4.4-7.el6.x86_64 3/3

Installed:
crontabs.noarch 0:1.10-33.el6

Dependency Installed:
cronie.x86_64 0:1.4.4-7.el6 cronie-anacron.x86_64 0:1.4.4-7.el6

Complete!

[root@shizune installer]# service crond start
Starting crond: [ OK ]

telnet localhost 25 refused

Was trying to configure my linux box to send email. When I tried to telnet the port 25 for localhost I've got the error below:

[root@shizune installer]# telnet localhost 25
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused

After issuing the netstat -nl command, I didn't see pot 25 listening to daemon at the localhost.

[root@shizune installer]# netstat -nl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN
tcp 0 0 :::80 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6453 @/com/ubuntu/upstart
unix 2 [ ACC ] STREAM LISTENING 18878 /var/lib/mysql/mysql.sock
unix 2 [ ACC ] STREAM LISTENING 7991 @/var/run/hald/dbus-Hvebo5KGlA
unix 2 [ ACC ] STREAM LISTENING 7908 /var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 8418 /var/run/abrt/abrt.socket
unix 2 [ ACC ] STREAM LISTENING 7996 @/var/run/hald/dbus-9kHuL7iipY

To fix the problem you need to install the postfix into your server.

[root@shizune installer]# yum --enablerepo=remi install postfix
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: centos.ipserverone.com
* extras: centos.ipserverone.com
* remi: iut-info.univ-reims.fr
* updates: centosk3.centos.org
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package postfix.x86_64 2:2.6.6-2.2.el6_1 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

==================================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================================
Installing:
postfix x86_64 2:2.6.6-2.2.el6_1 base 2.0 M

Transaction Summary
==================================================================================================================================================================
Install 1 Package(s)

Total download size: 2.0 M
Installed size: 9.7 M
Is this ok [y/N]: y
Downloading Packages:
postfix-2.6.6-2.2.el6_1.x86_64.rpm | 2.0 MB 00:03
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : 2:postfix-2.6.6-2.2.el6_1.x86_64 1/1

Installed:
postfix.x86_64 2:2.6.6-2.2.el6_1

Complete!
[root@shizune installer]# service postfix status
master is stopped
[root@shizune installer]# service postfix start
Starting postfix: [ OK ]
[root@shizune installer]# telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 shizune.localhost.org ESMTP Postfix

[root@shizune installer]# netstat -nl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN
tcp 0 0 :::80 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 6453 @/com/ubuntu/upstart
unix 2 [ ACC ] STREAM LISTENING 18878 /var/lib/mysql/mysql.sock
unix 2 [ ACC ] STREAM LISTENING 7991 @/var/run/hald/dbus-Hvebo5KGlA
unix 2 [ ACC ] STREAM LISTENING 7908 /var/run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 8418 /var/run/abrt/abrt.socket
unix 2 [ ACC ] STREAM LISTENING 7996 @/var/run/hald/dbus-9kHuL7iipY
unix 2 [ ACC ] STREAM LISTENING 28810 public/cleanup
unix 2 [ ACC ] STREAM LISTENING 28817 private/tlsmgr
unix 2 [ ACC ] STREAM LISTENING 28821 private/rewrite
unix 2 [ ACC ] STREAM LISTENING 28825 private/bounce
unix 2 [ ACC ] STREAM LISTENING 28829 private/defer
unix 2 [ ACC ] STREAM LISTENING 28833 private/trace
unix 2 [ ACC ] STREAM LISTENING 28837 private/verify
unix 2 [ ACC ] STREAM LISTENING 28841 public/flush
unix 2 [ ACC ] STREAM LISTENING 28845 private/proxymap
unix 2 [ ACC ] STREAM LISTENING 28849 private/proxywrite
unix 2 [ ACC ] STREAM LISTENING 28853 private/smtp
unix 2 [ ACC ] STREAM LISTENING 28857 private/relay
unix 2 [ ACC ] STREAM LISTENING 28861 public/showq
unix 2 [ ACC ] STREAM LISTENING 28865 private/error
unix 2 [ ACC ] STREAM LISTENING 28869 private/retry
unix 2 [ ACC ] STREAM LISTENING 28873 private/discard
unix 2 [ ACC ] STREAM LISTENING 28877 private/local
unix 2 [ ACC ] STREAM LISTENING 28881 private/virtual
unix 2 [ ACC ] STREAM LISTENING 28885 private/lmtp
unix 2 [ ACC ] STREAM LISTENING 28889 private/anvil
unix 2 [ ACC ] STREAM LISTENING 28893 private/scache

No rule to make target `/usr/lib64/perl5/CORE/config.h', needed by `Makefile'

While i was trying to install an application using Makefile.PL it returns an error below.

[root@shizune ExtUtils-MakeMaker-6.62]# perl Makefile.PL
Using included version of JSON::PP (2.27104) because it is not already installed.
Using included version of File::Copy::Recursive (0.38) because it is not already installed.
Using included version of CPAN::Meta::YAML (0.003) because it is not already installed.
Using included version of ExtUtils::Manifest (1.58) as it is newer than the installed version (1.56).
Using included version of JSON::PP::Compat5006 (1.09) because it is not already installed.
Using included version of version (0.88) as it is newer than the installed version (0.77).
Using included version of CPAN::Meta (2.112150) because it is not already installed.
Using included version of Parse::CPAN::Meta (1.4401) because it is not already installed.
Using included version of Version::Requirements (0.101020) because it is not already installed.
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml and MYMETA.json

[root@shizune ExtUtils-MakeMaker-6.62]# make
make: *** No rule to make target `/usr/lib64/perl5/CORE/config.h', needed by `Makefile'. Stop.

Solution:

Check if the perl-devel was installed. If not try installing it then your problem is solved.

[root@shizune mytop-1.6]# rpm -qa | grep perl-devel
perl-devel-5.10.1-127.el6.x86_64
[root@shizune mytop-1.6]#

[root@shizune ExtUtils-MakeMaker-6.62]# yum --enablerepo=remi install perl-devel
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: centos.ipserverone.com
* extras: centos.ipserverone.com
* remi: rpms.famillecollet.com
* updates: centoso4.centos.org
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package perl-devel.x86_64 4:5.10.1-127.el6 will be installed
--> Processing Dependency: perl = 4:5.10.1-127.el6 for package: 4:perl-devel-5.10.1-127.el6.x86_64
--> Processing Dependency: perl(ExtUtils::ParseXS) for package: 4:perl-devel-5.10.1-127.el6.x86_64
--> Processing Dependency: perl(ExtUtils::MakeMaker) for package: 4:perl-devel-5.10.1-127.el6.x86_64
--> Processing Dependency: perl(ExtUtils::Installed) for package: 4:perl-devel-5.10.1-127.el6.x86_64
--> Running transaction check
---> Package perl.x86_64 4:5.10.1-119.el6_1.1 will be updated
--> Processing Dependency: perl = 4:5.10.1-119.el6_1.1 for package: 1:perl-Module-Pluggable-3.90-119.el6_1.1.x86_64
--> Processing Dependency: perl = 4:5.10.1-119.el6_1.1 for package: 3:perl-version-0.77-119.el6_1.1.x86_64
--> Processing Dependency: perl = 4:5.10.1-119.el6_1.1 for package: 1:perl-Pod-Simple-3.13-119.el6_1.1.x86_64
--> Processing Dependency: perl = 4:5.10.1-119.el6_1.1 for package: 1:perl-Pod-Escapes-1.04-119.el6_1.1.x86_64
--> Processing Dependency: perl = 4:5.10.1-119.el6_1.1 for package: 4:perl-libs-5.10.1-119.el6_1.1.x86_64
---> Package perl.x86_64 4:5.10.1-127.el6 will be an update
---> Package perl-ExtUtils-MakeMaker.x86_64 0:6.55-127.el6 will be installed
--> Processing Dependency: perl(Test::Harness) for package: perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64
---> Package perl-ExtUtils-ParseXS.x86_64 1:2.2003.0-127.el6 will be installed
--> Running transaction check
---> Package perl-Module-Pluggable.x86_64 1:3.90-119.el6_1.1 will be updated
---> Package perl-Module-Pluggable.x86_64 1:3.90-127.el6 will be an update
---> Package perl-Pod-Escapes.x86_64 1:1.04-119.el6_1.1 will be updated
---> Package perl-Pod-Escapes.x86_64 1:1.04-127.el6 will be an update
---> Package perl-Pod-Simple.x86_64 1:3.13-119.el6_1.1 will be updated
---> Package perl-Pod-Simple.x86_64 1:3.13-127.el6 will be an update
---> Package perl-Test-Harness.x86_64 0:3.17-127.el6 will be installed
---> Package perl-libs.x86_64 4:5.10.1-119.el6_1.1 will be updated
---> Package perl-libs.x86_64 4:5.10.1-127.el6 will be an update
---> Package perl-version.x86_64 3:0.77-119.el6_1.1 will be updated
---> Package perl-version.x86_64 3:0.77-127.el6 will be an update
--> Finished Dependency Resolution

Dependencies Resolved

==================================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================================
Installing:
perl-devel x86_64 4:5.10.1-127.el6 base 421 k
Installing for dependencies:
perl-ExtUtils-MakeMaker x86_64 6.55-127.el6 base 291 k
perl-ExtUtils-ParseXS x86_64 1:2.2003.0-127.el6 base 43 k
perl-Test-Harness x86_64 3.17-127.el6 base 229 k
Updating for dependencies:
perl x86_64 4:5.10.1-127.el6 base 10 M
perl-Module-Pluggable x86_64 1:3.90-127.el6 base 38 k
perl-Pod-Escapes x86_64 1:1.04-127.el6 base 30 k
perl-Pod-Simple x86_64 1:3.13-127.el6 base 210 k
perl-libs x86_64 4:5.10.1-127.el6 base 576 k
perl-version x86_64 3:0.77-127.el6 base 49 k

Transaction Summary
==================================================================================================================================================================
Install 4 Package(s)
Upgrade 6 Package(s)

Total download size: 12 M
Is this ok [y/N]: y
Downloading Packages:
(1/10): perl-5.10.1-127.el6.x86_64.rpm | 10 MB 00:10
(2/10): perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64.rpm | 291 kB 00:00
(3/10): perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64.rpm | 43 kB 00:00
(4/10): perl-Module-Pluggable-3.90-127.el6.x86_64.rpm | 38 kB 00:00
(5/10): perl-Pod-Escapes-1.04-127.el6.x86_64.rpm | 30 kB 00:00
(6/10): perl-Pod-Simple-3.13-127.el6.x86_64.rpm | 210 kB 00:01
(7/10): perl-Test-Harness-3.17-127.el6.x86_64.rpm | 229 kB 00:00
(8/10): perl-devel-5.10.1-127.el6.x86_64.rpm | 421 kB 00:02
(9/10): perl-libs-5.10.1-127.el6.x86_64.rpm | 576 kB 00:01
(10/10): perl-version-0.77-127.el6.x86_64.rpm | 49 kB 00:00
------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total 592 kB/s | 12 MB 00:20
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Updating : 1:perl-Pod-Escapes-1.04-127.el6.x86_64 1/16
Updating : 4:perl-libs-5.10.1-127.el6.x86_64 2/16
Updating : 1:perl-Pod-Simple-3.13-127.el6.x86_64 3/16
Updating : 3:perl-version-0.77-127.el6.x86_64 4/16
Updating : 1:perl-Module-Pluggable-3.90-127.el6.x86_64 5/16
Updating : 4:perl-5.10.1-127.el6.x86_64 6/16
Installing : 1:perl-ExtUtils-ParseXS-2.2003.0-127.el6.x86_64 7/16
Installing : perl-ExtUtils-MakeMaker-6.55-127.el6.x86_64 8/16
Installing : 4:perl-devel-5.10.1-127.el6.x86_64 9/16
Installing : perl-Test-Harness-3.17-127.el6.x86_64 10/16
Cleanup : 1:perl-Pod-Escapes-1.04-119.el6_1.1.x86_64 11/16
Cleanup : 1:perl-Pod-Simple-3.13-119.el6_1.1.x86_64 12/16
Cleanup : 3:perl-version-0.77-119.el6_1.1.x86_64 13/16
Cleanup : 4:perl-libs-5.10.1-119.el6_1.1.x86_64 14/16
Cleanup : 4:perl-5.10.1-119.el6_1.1.x86_64 15/16
Cleanup : 1:perl-Module-Pluggable-3.90-119.el6_1.1.x86_64 16/16

Installed:
perl-devel.x86_64 4:5.10.1-127.el6

Dependency Installed:
perl-ExtUtils-MakeMaker.x86_64 0:6.55-127.el6 perl-ExtUtils-ParseXS.x86_64 1:2.2003.0-127.el6 perl-Test-Harness.x86_64 0:3.17-127.el6

Dependency Updated:
perl.x86_64 4:5.10.1-127.el6 perl-Module-Pluggable.x86_64 1:3.90-127.el6 perl-Pod-Escapes.x86_64 1:1.04-127.el6 perl-Pod-Simple.x86_64 1:3.13-127.el6
perl-libs.x86_64 4:5.10.1-127.el6 perl-version.x86_64 3:0.77-127.el6

Complete!

[root@shizune ExtUtils-MakeMaker-6.62]# perl Makefile.PL
Using included version of JSON::PP (2.27104) because it is not already installed.
Using included version of File::Copy::Recursive (0.38) because it is not already installed.
Using included version of CPAN::Meta::YAML (0.003) because it is not already installed.
Using included version of ExtUtils::Manifest (1.58) as it is newer than the installed version (1.56).
Using included version of JSON::PP::Compat5006 (1.09) because it is not already installed.
Using included version of version (0.88) as it is newer than the installed version (0.77).
Using included version of CPAN::Meta (2.112150) because it is not already installed.
Using included version of Parse::CPAN::Meta (1.4401) because it is not already installed.
Using included version of Version::Requirements (0.101020) because it is not already installed.
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml and MYMETA.json
[root@shizune ExtUtils-MakeMaker-6.62]# make
cp inc/ExtUtils/Manifest.pm blib/lib/ExtUtils/Manifest.pm
cp inc/File/Copy/Recursive.pm blib/lib/File/Copy/Recursive.pm
cp lib/ExtUtils/MM_VOS.pm blib/lib/ExtUtils/MM_VOS.pm
cp lib/ExtUtils/Mksymlists.pm blib/lib/ExtUtils/Mksymlists.pm
cp lib/ExtUtils/MM.pm blib/lib/ExtUtils/MM.pm
cp inc/JSON/PP.pm blib/lib/JSON/PP.pm
cp lib/ExtUtils/MM_UWIN.pm blib/lib/ExtUtils/MM_UWIN.pm
cp lib/ExtUtils/testlib.pm blib/lib/ExtUtils/testlib.pm
cp lib/ExtUtils/MM_DOS.pm blib/lib/ExtUtils/MM_DOS.pm
cp lib/ExtUtils/MM_Cygwin.pm blib/lib/ExtUtils/MM_Cygwin.pm
cp inc/version/vpp.pm blib/lib/version/vpp.pm
cp lib/ExtUtils/MM_Win95.pm blib/lib/ExtUtils/MM_Win95.pm
cp lib/ExtUtils/Liblist.pm blib/lib/ExtUtils/Liblist.pm
cp lib/ExtUtils/MM_Darwin.pm blib/lib/ExtUtils/MM_Darwin.pm
cp lib/ExtUtils/MM_AIX.pm blib/lib/ExtUtils/MM_AIX.pm
cp lib/ExtUtils/Liblist/Kid.pm blib/lib/ExtUtils/Liblist/Kid.pm
cp lib/ExtUtils/Mkbootstrap.pm blib/lib/ExtUtils/Mkbootstrap.pm
cp lib/ExtUtils/MakeMaker/FAQ.pod blib/lib/ExtUtils/MakeMaker/FAQ.pod
cp inc/ExtUtils/MANIFEST.SKIP blib/lib/ExtUtils/MANIFEST.SKIP
cp lib/ExtUtils/MM_NW5.pm blib/lib/ExtUtils/MM_NW5.pm
cp lib/ExtUtils/MM_OS2.pm blib/lib/ExtUtils/MM_OS2.pm
cp lib/ExtUtils/MakeMaker.pm blib/lib/ExtUtils/MakeMaker.pm
cp inc/version.pm blib/lib/version.pm
cp inc/CPAN/Meta/Feature.pm blib/lib/CPAN/Meta/Feature.pm
cp inc/version/Internals.pod blib/lib/version/Internals.pod
cp lib/ExtUtils/MM_Unix.pm blib/lib/ExtUtils/MM_Unix.pm
cp inc/JSON/PP/Boolean.pm blib/lib/JSON/PP/Boolean.pm
cp lib/ExtUtils/MM_Win32.pm blib/lib/ExtUtils/MM_Win32.pm
cp inc/CPAN/Meta/Spec.pm blib/lib/CPAN/Meta/Spec.pm
cp inc/CPAN/Meta/History.pm blib/lib/CPAN/Meta/History.pm
cp lib/ExtUtils/MY.pm blib/lib/ExtUtils/MY.pm
cp lib/ExtUtils/MM_MacOS.pm blib/lib/ExtUtils/MM_MacOS.pm
cp lib/ExtUtils/MM_VMS.pm blib/lib/ExtUtils/MM_VMS.pm
cp lib/ExtUtils/MM_BeOS.pm blib/lib/ExtUtils/MM_BeOS.pm
cp lib/ExtUtils/MakeMaker/Tutorial.pod blib/lib/ExtUtils/MakeMaker/Tutorial.pod
cp inc/CPAN/Meta/YAML.pm blib/lib/CPAN/Meta/YAML.pm
cp lib/ExtUtils/MM_QNX.pm blib/lib/ExtUtils/MM_QNX.pm
cp inc/CPAN/Meta/Converter.pm blib/lib/CPAN/Meta/Converter.pm
cp lib/ExtUtils/Command/MM.pm blib/lib/ExtUtils/Command/MM.pm
cp lib/ExtUtils/MakeMaker/Config.pm blib/lib/ExtUtils/MakeMaker/Config.pm
cp inc/JSON/PP/Compat5006.pm blib/lib/JSON/PP/Compat5006.pm
cp inc/CPAN/Meta.pm blib/lib/CPAN/Meta.pm
cp inc/Parse/CPAN/Meta.pm blib/lib/Parse/CPAN/Meta.pm
cp inc/CPAN/Meta/Prereqs.pm blib/lib/CPAN/Meta/Prereqs.pm
cp inc/Version/Requirements.pm blib/lib/Version/Requirements.pm
cp inc/CPAN/Meta/Validator.pm blib/lib/CPAN/Meta/Validator.pm
cp inc/version.pod blib/lib/version.pod
cp lib/ExtUtils/MM_Any.pm blib/lib/ExtUtils/MM_Any.pm
cp bin/instmodsh blib/script/instmodsh
/usr/bin/perl "-Iblib/arch" "-Iblib/lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/instmodsh
Manifying blib/man1/instmodsh.1
Manifying blib/man3/ExtUtils::Manifest.3pm
Manifying blib/man3/File::Copy::Recursive.3pm
Manifying blib/man3/ExtUtils::MM_VOS.3pm
Manifying blib/man3/ExtUtils::Mksymlists.3pm
Manifying blib/man3/ExtUtils::MM.3pm
Manifying blib/man3/JSON::PP.3pm
Manifying blib/man3/ExtUtils::MM_UWIN.3pm
Manifying blib/man3/ExtUtils::testlib.3pm
Manifying blib/man3/ExtUtils::MM_DOS.3pm
Manifying blib/man3/ExtUtils::MM_Cygwin.3pm
Manifying blib/man3/ExtUtils::MM_Win95.3pm
Manifying blib/man3/ExtUtils::Liblist.3pm
Manifying blib/man3/ExtUtils::MM_Darwin.3pm
Manifying blib/man3/ExtUtils::MM_AIX.3pm
Manifying blib/man3/ExtUtils::Mkbootstrap.3pm
Manifying blib/man3/ExtUtils::MakeMaker::FAQ.3pm
Manifying blib/man3/ExtUtils::MM_NW5.3pm
Manifying blib/man3/ExtUtils::MM_OS2.3pm
Manifying blib/man3/ExtUtils::MakeMaker.3pm
Manifying blib/man3/CPAN::Meta::Feature.3pm
Manifying blib/man3/version::Internals.3pm
Manifying blib/man3/ExtUtils::MM_Unix.3pm
Manifying blib/man3/JSON::PP::Boolean.3pm
Manifying blib/man3/ExtUtils::MM_Win32.3pm
Manifying blib/man3/CPAN::Meta::Spec.3pm
Manifying blib/man3/CPAN::Meta::History.3pm
Manifying blib/man3/ExtUtils::MY.3pm
Manifying blib/man3/ExtUtils::MM_MacOS.3pm
Manifying blib/man3/ExtUtils::MM_VMS.3pm
Manifying blib/man3/ExtUtils::MM_BeOS.3pm
Manifying blib/man3/ExtUtils::MakeMaker::Tutorial.3pm
Manifying blib/man3/ExtUtils::MM_QNX.3pm
Manifying blib/man3/CPAN::Meta::YAML.3pm
Manifying blib/man3/CPAN::Meta::Converter.3pm
Manifying blib/man3/ExtUtils::Command::MM.3pm
Manifying blib/man3/JSON::PP::Compat5006.3pm
Manifying blib/man3/ExtUtils::MakeMaker::Config.3pm
Manifying blib/man3/CPAN::Meta.3pm
Manifying blib/man3/CPAN::Meta::Prereqs.3pm
Manifying blib/man3/Parse::CPAN::Meta.3pm
Manifying blib/man3/CPAN::Meta::Validator.3pm
Manifying blib/man3/Version::Requirements.3pm
Manifying blib/man3/version.3pm
Manifying blib/man3/ExtUtils::MM_Any.3pm

[root@shizune ExtUtils-MakeMaker-6.62]# make install
Installing /usr/share/perl5/version.pm
Installing /usr/share/perl5/version.pod
Installing /usr/share/perl5/Parse/CPAN/Meta.pm
Installing /usr/share/perl5/Version/Requirements.pm
Installing /usr/share/perl5/CPAN/Meta.pm
Installing /usr/share/perl5/CPAN/Meta/YAML.pm
Installing /usr/share/perl5/CPAN/Meta/History.pm
Installing /usr/share/perl5/CPAN/Meta/Prereqs.pm
Installing /usr/share/perl5/CPAN/Meta/Feature.pm
Installing /usr/share/perl5/CPAN/Meta/Spec.pm
Installing /usr/share/perl5/CPAN/Meta/Converter.pm
Installing /usr/share/perl5/CPAN/Meta/Validator.pm
Installing /usr/share/perl5/File/Copy/Recursive.pm
Installing /usr/share/perl5/ExtUtils/MM_QNX.pm
Installing /usr/share/perl5/ExtUtils/MM_Cygwin.pm
Installing /usr/share/perl5/ExtUtils/MM_Win95.pm
Installing /usr/share/perl5/ExtUtils/MM_VMS.pm
Installing /usr/share/perl5/ExtUtils/MM_BeOS.pm
Installing /usr/share/perl5/ExtUtils/MM_NW5.pm
Installing /usr/share/perl5/ExtUtils/MM_Any.pm
Installing /usr/share/perl5/ExtUtils/Manifest.pm
Installing /usr/share/perl5/ExtUtils/MM_VOS.pm
Installing /usr/share/perl5/ExtUtils/MM_DOS.pm
Installing /usr/share/perl5/ExtUtils/MM_Darwin.pm
Installing /usr/share/perl5/ExtUtils/testlib.pm
Installing /usr/share/perl5/ExtUtils/MM_AIX.pm
Installing /usr/share/perl5/ExtUtils/MM_UWIN.pm
Installing /usr/share/perl5/ExtUtils/Mkbootstrap.pm
Installing /usr/share/perl5/ExtUtils/MM_Unix.pm
Installing /usr/share/perl5/ExtUtils/MANIFEST.SKIP
Installing /usr/share/perl5/ExtUtils/Mksymlists.pm
Installing /usr/share/perl5/ExtUtils/MY.pm
Installing /usr/share/perl5/ExtUtils/MM.pm
Installing /usr/share/perl5/ExtUtils/MM_MacOS.pm
Installing /usr/share/perl5/ExtUtils/MM_OS2.pm
Installing /usr/share/perl5/ExtUtils/Liblist.pm
Installing /usr/share/perl5/ExtUtils/MM_Win32.pm
Installing /usr/share/perl5/ExtUtils/MakeMaker.pm
Installing /usr/share/perl5/ExtUtils/Liblist/Kid.pm
Installing /usr/share/perl5/ExtUtils/Command/MM.pm
Installing /usr/share/perl5/ExtUtils/MakeMaker/FAQ.pod
Installing /usr/share/perl5/ExtUtils/MakeMaker/Tutorial.pod
Installing /usr/share/perl5/ExtUtils/MakeMaker/Config.pm
Installing /usr/share/perl5/JSON/PP.pm
Installing /usr/share/perl5/JSON/PP/Compat5006.pm
Installing /usr/share/perl5/JSON/PP/Boolean.pm
Installing /usr/share/perl5/version/vpp.pm
Installing /usr/share/perl5/version/Internals.pod
Installing /usr/share/man/man1/instmodsh.1
Installing /usr/share/man/man3/ExtUtils::MakeMaker::Config.3pm
Installing /usr/share/man/man3/ExtUtils::MM_UWIN.3pm
Installing /usr/share/man/man3/ExtUtils::Mksymlists.3pm
Installing /usr/share/man/man3/CPAN::Meta::Converter.3pm
Installing /usr/share/man/man3/ExtUtils::MY.3pm
Installing /usr/share/man/man3/ExtUtils::Liblist.3pm
Installing /usr/share/man/man3/CPAN::Meta.3pm
Installing /usr/share/man/man3/ExtUtils::MM_AIX.3pm
Installing /usr/share/man/man3/ExtUtils::MakeMaker::FAQ.3pm
Installing /usr/share/man/man3/JSON::PP.3pm
Installing /usr/share/man/man3/version.3pm
Installing /usr/share/man/man3/ExtUtils::MM_VMS.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Darwin.3pm
Installing /usr/share/man/man3/ExtUtils::MM_MacOS.3pm
Installing /usr/share/man/man3/ExtUtils::Mkbootstrap.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Any.3pm
Installing /usr/share/man/man3/ExtUtils::MM_OS2.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Cygwin.3pm
Installing /usr/share/man/man3/CPAN::Meta::YAML.3pm
Installing /usr/share/man/man3/ExtUtils::MakeMaker.3pm
Installing /usr/share/man/man3/CPAN::Meta::History.3pm
Installing /usr/share/man/man3/ExtUtils::MM_VOS.3pm
Installing /usr/share/man/man3/ExtUtils::MM_NW5.3pm
Installing /usr/share/man/man3/ExtUtils::Manifest.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Win95.3pm
Installing /usr/share/man/man3/CPAN::Meta::Spec.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Unix.3pm
Installing /usr/share/man/man3/ExtUtils::MM_QNX.3pm
Installing /usr/share/man/man3/ExtUtils::MakeMaker::Tutorial.3pm
Installing /usr/share/man/man3/ExtUtils::MM_DOS.3pm
Installing /usr/share/man/man3/JSON::PP::Compat5006.3pm
Installing /usr/share/man/man3/CPAN::Meta::Feature.3pm
Installing /usr/share/man/man3/JSON::PP::Boolean.3pm
Installing /usr/share/man/man3/ExtUtils::Command::MM.3pm
Installing /usr/share/man/man3/ExtUtils::MM.3pm
Installing /usr/share/man/man3/ExtUtils::testlib.3pm
Installing /usr/share/man/man3/Parse::CPAN::Meta.3pm
Installing /usr/share/man/man3/File::Copy::Recursive.3pm
Installing /usr/share/man/man3/CPAN::Meta::Prereqs.3pm
Installing /usr/share/man/man3/ExtUtils::MM_Win32.3pm
Installing /usr/share/man/man3/version::Internals.3pm
Installing /usr/share/man/man3/Version::Requirements.3pm
Installing /usr/share/man/man3/ExtUtils::MM_BeOS.3pm
Installing /usr/share/man/man3/CPAN::Meta::Validator.3pm
Installing /usr/bin/instmodsh
Appending installation info to /usr/lib64/perl5/perllocal.pod